THUMB WHEEL SWITCH CONTROL
WINDOW DISPLAY SYSTEM – THUMBWHEEL SWITCH
Model No. of Windows with 0.5” LED Model No. of Windows
with 1.0” LED
WDTW-0502 2 WDTW-10-02 2
WDTW-05-03 3 WDTW-10-03 3
WDTW-05-04 4 WDTW-10-04 4

SPECIFICATION
:


  • Display type: High bright :Red LED.

  • Display size: 0.5 inch seven-segment FND.
  • Display format: “XX.XX” or “XXX” or “XXXX” format
        depending on requirement. Here X indicates a digit of
        number to be displayed on the board
  • .
  • Mode of Number Changing in window Thumb Wheel Switch.

  • 220V A.C power supply.
  • ON / OFF Switch provided.
  •  

     
       
     

    SETTING THE RATES

  •  All windows can be set individually with the help of Thumb
         Wheel Switches attached to the board.
  • Each window has corresponding Thumb Wheel Switches.
  •  The no.s are displayed on the Thumb Wheel Switches.
          As the switch is pressed either Up or Down, the number
          keeps incrementing Up or Down.
  • Once set the LED displays, the numbers are ON.
         [ Thumb Wheel Switch.]


  • WINDOW DISPLAY SYSTEM – KEYPAD MODEL
    Model No. of Windows
    with 0.5” LED
    Model No. of Windows
    with 1.0” LED
    WDKP-05-06 6 WDKP-10-06 6
    WDKP-05-08 8 WDKP-10-08 8
    WDKP-05-10 10 WDKP-10-10 10
    WDKP-05-12 12 WDKP-10-12 12
       
      

    SPECIFICATION :

  • Display type: High bright FND red LED.

  • Display size: 0.5 inch seven-segment FND

  • Display format: “XX.XX” or “XXX” or “XXXX” format
         depending on requirement. Here X indicates a digit of
         no. to be displayed on the board.

  • Battery Backup: Provided to retain Memory in case of
          power failure, no display will be available.

  • Mode of Number Changing in window

  • Telephone style keypad is provided along with the display.

  • 220V A.C single phase-ON / OFF Switch provided.
  • SETTING THE RATES

    The Keypad connecting cable will have to be attached to the connector in the board.

    By default the first window is in edit mode.
    Key in the required number to edit the window.
    Else press “#” key to skip window.

    The “*” key resets the window in edit mode.
    Once the editing of all windows is completed, remove the keypad connector from the board.

    Switch off and Switch on the system to confirm
    settings. Edited fig. remain till next change.



    WINDOW DISPLAY SYSTEM – REMOTE CONTROL MODEL
    Model No. of Windows
    with 0.5” LED
    Model No. of Windows
    with 1.0” LED
    WDRC-05-06 6 WDRC-10-06 6
    WDRC-05-08 8 WDRC-10-08 8
    WDRC-05-10 10 WDRC-10-10 10
    WDRC-05-12 12 WDRC-10-12 12

    SPECIFICATION :

  • Display type: High bright FND red LED.
  • Display size: 0.5 inch seven-segment FND
  • Display format: “XX.XX” or “XXX” or “XXXX” format depending
         on requirement – Here X indicates a digit of Number to be
         displayed on the board.
  • Battery Backup: Provided to retain Memory in case of power
         failure, no display will be available.
  • Mode of Number Changing in window:IR remote Keypad
  • Standard IR remote used to change the rates
  • ON/OFF Switch provided.
  •    


         
    top
    Sorry, your browser doesn't support Java.